Are you doing fresh-water trolling? Then you are probably using the standard glass fiber fishing gear. This is optimal for this type of fishing, since it is proven to be both lightweight and durable.
In my experience, the usual bait-casting reel is adequate for most applications. The exception would be deep trolling.
As you may expect, you need to adjust the size of the tackle to the size and weight of the fishing lure. Small lure - light tackle, and so on. Medium and medium-heavy gear is recommended for freshwater trolling in most cases.
Choosing the right lure is very important when fishing any considerable distance under the surface. You can use different weights and sizes of the same lure to reach different depths, including bumping the bottom, or you can use an assortment of different designs in various weights.
For trolling, wobbling spoons are well suited. You will find that some can be trolled at various speeds and perform well, while others need a particular speed for best results. You have to test this out for each one.
If you are fishing for muskies, lake trout or pike, use some of the larger spoons or spinners. My personal preference is a spoon that wobbles rather than spins when trolled. I find trolling the latter a bit too tiring.
Spinners pull harder in relation to their size than spoons, and big, round-bladed spinners are an effort to use on light tackle. Spinners have a tendency to twist a line, so when you are trolling with them, it is usually advisable to add extra swivels. Some spinners twist a line so badly that a rudder-shaped sinker or a plastic keel placed ahead of them will save you from much grief.
If your fishing line does get tangled, you have a problem that taxes your patience. If it happens to be just twisted, there is the method of un-twisting it by letting it out behind a fast-moving boat (without any lure of course). Then it should un-twist itself. On the other hand, a really tangled line could be so hard to get back in shape that you might as well replace it with a new one. - 16928
In my experience, the usual bait-casting reel is adequate for most applications. The exception would be deep trolling.
As you may expect, you need to adjust the size of the tackle to the size and weight of the fishing lure. Small lure - light tackle, and so on. Medium and medium-heavy gear is recommended for freshwater trolling in most cases.
Choosing the right lure is very important when fishing any considerable distance under the surface. You can use different weights and sizes of the same lure to reach different depths, including bumping the bottom, or you can use an assortment of different designs in various weights.
For trolling, wobbling spoons are well suited. You will find that some can be trolled at various speeds and perform well, while others need a particular speed for best results. You have to test this out for each one.
If you are fishing for muskies, lake trout or pike, use some of the larger spoons or spinners. My personal preference is a spoon that wobbles rather than spins when trolled. I find trolling the latter a bit too tiring.
Spinners pull harder in relation to their size than spoons, and big, round-bladed spinners are an effort to use on light tackle. Spinners have a tendency to twist a line, so when you are trolling with them, it is usually advisable to add extra swivels. Some spinners twist a line so badly that a rudder-shaped sinker or a plastic keel placed ahead of them will save you from much grief.
If your fishing line does get tangled, you have a problem that taxes your patience. If it happens to be just twisted, there is the method of un-twisting it by letting it out behind a fast-moving boat (without any lure of course). Then it should un-twist itself. On the other hand, a really tangled line could be so hard to get back in shape that you might as well replace it with a new one. - 16928
About the Author:
Find more advice on fishing at Fishing-secrets.net, a fishing blog packed with advice on all types of fishing. Get a totally unique version of this article from our article submission service
No comments:
Post a Comment